E-Bike Parts: chargers, batteries, controllers, brakes, tires and more

Replacement and spare lithium packs — match voltage, mount and connector.

Replacement chargers — voltage, amperage and plug type must match your pack.

The brain between battery, motor, throttle and display.

LCD/LED displays and replacement screens matched to your controller protocol.

Replacement hub and mid-drive motors and conversion kits.

Front and rear geared/direct-drive hub motors and wheel kits.

Chainrings, kits and service parts for mid-drive systems.

Main cables and extension harnesses for display, throttle and brake sensors.

XT60/XT90, Anderson, Julet/Higo waterproof connectors and battery discharge plugs.

Screens and protective covers for common display models.

Thumb and twist throttles — connector and voltage signal must match.

Cadence and torque sensors that tell the controller you are pedaling.

Disc pads in the right shape and compound for heavier, faster e-bikes.

160/180/203 mm rotors — check mount type (6-bolt vs Centerlock).

Mechanical and hydraulic levers, including e-bike levers with motor cut-off sensors.

Calipers, hoses, olives, bleed kits and mineral oil / DOT fluid.

E-bike rated tires with puncture protection in the common 20×4, 26×4, 27.5 and 700c sizes.

Schrader/Presta tubes, thorn-resistant and sealant-filled options.

Sealant, valves, rim tape and plugs for tubeless setups.

Replacement wheels and rims, including motor-compatible dropout widths.

Spokes sized for hub-motor flanges and heavy e-bike loads.

7–12 speed cassettes; freehub standard must match your wheel.

Thread-on freewheels common on hub-motor e-bikes (often 7-speed).

E-bike rated chains with stronger plates; match your speed count.

Rear derailleurs, hangers and shifters for common e-bike drivetrains.

Cranks, chainrings and bottom brackets — including PAS-compatible options.

Flat, wide-platform and folding pedals with grip for commuting.

Headlights and taillights — battery-powered or wired to the main pack.

Full-coverage and fat-tire fenders sized to your wheel and tire width.

Front and rear rack hardware for commuter and cargo setups.

Heavy-duty single and double-leg stands rated for e-bike weight.

Wide comfort saddles, suspension seats and replacement covers.

Suspension and rigid posts — check diameter (27.2, 30.9, 31.6 mm).

Riser, swept-back and adjustable stems for a more upright fit.

Ergonomic and lock-on grips for numb-hand relief.