Frisco E-Bike

E-Bike Accessories: helmets, locks, racks, bags, lights and mounts

Accessories that survive e-bike speeds and weights — helmets rated for faster riding, locks worth the bike, racks with real load ratings, phone mounts that do not shake loose. Original picks and selection notes for each category.

Bike with a rear cargo bag
Popular:
Or describe what you need and we will narrow it down.

35 products

All accessories

Filter, then open a product for our notes and the Amazon listing.

Cyclist wearing a helmet
E-Bike HelmetsFeatured

Bell Annex MIPS Commuter Helmet

The Annex is Bell's workhorse urban helmet: an in-mold shell with MIPS, a sliding vent shutter you can close on cold mornings, and an integrated rear light mount. It is not built to the newer e-bike-specific NTA 8776 standard, but for Class 1 and Class 2 riding at neighborhood speeds it covers what most commuters actually need. The fit dial has a wide range and the visor pops off if you prefer sunglasses. Expect it to sit toward the heavier side for its class because of the extra coverage at the back of the head.

Best for: Daily commuters on Class 1–2 e-bikes · Riders who want MIPS without a premium price · Cold-weather riders who like closable vents

Bicycle locks and chains on a wall
Lighting (Accessory)Featured

Cygolite Metro Plus 800 USB Headlight

Many e-bikes ship with a dim, battery-powered headlight that is fine for being seen and useless for seeing. The Metro Plus 800 is the upgrade most shops sell: 800 lumens on high, a useful daytime flash mode, a wide beam, and a tool-free bar mount. It charges by USB and lasts a couple of hours on high or many hours in flash. Made in the US, and Cygolite's support is good. It is not a shaped beam like European StVZO lights, so tilt it down to avoid blinding oncoming riders on the trail. For night commuting this is a sensible, durable choice.

Best for: Commuters riding before dawn or after dark · Replacing weak stock lights · Daytime visibility flashing

City bike with a backpack
Tire Repair KitsFeatured

Park Tool GP-2 Super Patch Glueless Patch Kit

The GP-2 is a tiny box of self-adhesive patches and a sandpaper square that fits in any saddle bag. Glueless patches are the right roadside tool: no waiting for vulcanizing cement to flash off, no dried-up tube of glue when you finally need it. Scuff the tube, press the patch hard, reinstall. They are reliable on punctures from thorns and glass; they are not for large gashes or valve-base tears. Many riders buy two or three packs and stash one on each bike. Pair it with tire levers and a pump and you have a real flat kit for a few dollars.

Best for: Every saddle bag · Quick roadside repairs · Riders who let glue kits dry out

Bike with a rear cargo bag
Phone MountsFeatured

Quad Lock Out Front Bike Mount

Quad Lock's twist-lock system is the standard most other mounts are measured against, and the Out Front version places the phone ahead of the stem where it sits level and easy to read. You need a Quad Lock case or universal adapter for your phone, which is the main catch and the main strength: the lock is positive, vibration-tolerant, and does not rely on clamps that loosen over potholes. For e-bikes with heavy vibration or fat tires, add the optional vibration dampener to protect camera stabilization hardware. The arm clamps 31.8 mm or 35 mm bars depending on the version.

Best for: Riders who navigate on the phone daily · E-bikes with cluttered cockpits · Phones in Quad Lock cases already

Bike tools organized on a workshop rack
PumpsFeatured

Topeak Joe Blow Sport III Floor Pump

The Joe Blow Sport III is the floor pump you find in half the garages of people who ride regularly. It has a steel barrel, a large top-mounted gauge, a stable base, and the TwinHead that fits Presta and Schrader without flipping parts. E-bike tires run low pressures compared to road bikes, so what matters is a gauge you can read at 15 to 40 psi and a head that seals on Schrader valves, and this pump does both. It is not a high-volume fat-bike pump, so a 4-inch tire takes a lot of strokes, but it will get there.

Best for: Home garage pumping · Schrader and Presta households · Riders who want a readable gauge

Bike with a rear cargo bag
Rear Racks

Blackburn Outpost Fat Bike Rear Rack

Fat-tire e-bikes are the fastest-growing segment and most standard racks simply do not fit around a 4-inch tire. Blackburn's Outpost Fat Bike rack is built wide and tall for fat tires up to roughly 5 inches, adjusts for wheel size, and mounts to eyelets or with included clamps where eyelets are missing. It is a touring-grade rack with a solid load rating and a top platform for dry bags. On fat-tire e-bikes the challenge is the rear hub motor width and wiring, so confirm the rack legs clear your dropouts and torque arm before committing.

Best for: Fat-tire e-bikes without a stock rack · Bikepacking and hunting setups · Riders needing a wide platform

Bicycle locks and chains on a wall
Water Bottles & Cages

CamelBak Podium Chill Insulated Bottle (21 oz)

In a Frisco July the difference between a plain bottle and an insulated one is whether the water is drinkable after twenty minutes. The Podium Chill is a double-wall squeeze bottle with a self-sealing jet valve that does not leak in a bag and opens when you squeeze. It fits standard cages, though the insulated version is a bit stiffer to squeeze than the plain Podium. It is dishwasher safe. It is one of the more common bottles you will see on e-bikes precisely because it is simple, cheap and keeps drinks cool for about as long as a neighborhood ride lasts.

Best for: Hot-weather riders · Commuters and neighborhood loops · Bags and backpacks (no leaks)

Green and black helmet on a bike handlebar
Multi-Tools

Crankbrothers M19 Multi-Tool

The M19 packs the bits most riders actually need — hex keys from 2 to 8 mm, Torx T25, screwdrivers, spoke wrenches and a chain breaker — into a tool small enough for a jersey pocket or a top tube bag. The build is solid with steel bits and a flask-style case. On an e-bike, the common roadside jobs are tightening a loose stem, adjusting a rattling rack bolt, or re-seating a dropped chain, and the M19 handles them. The 8 mm hex is handy for some crank bolts and axle nuts on folding bikes. The chain breaker works but is slow; it is there for emergencies.

Best for: Saddle bag or top tube bag carry · Riders who want a chain breaker on board · Stem, rack and accessory adjustments

City bike with a backpack
Pumps

CYCPLUS A2 Portable Electric Bike Pump

Small rechargeable electric inflators have become popular with e-bike owners, and the CYCPLUS A2 is one of the common ones: set a target pressure on the digital display, screw it onto the valve, and it runs until it hits the number. It works with Presta and Schrader and also inflates car tires in a pinch. The trade-offs are battery life (a few tires per charge on larger volumes), heat after continuous use, and accuracy that is good enough for e-bike tire pressures but not lab-grade. For riders who do not want to pump by hand, it is a convenient garage and car-trunk tool.

Best for: Riders who dislike manual pumping · Car trunk or garage use · Setting precise low pressures

Bike with a rear cargo bag
Lighting (Accessory)

Cygolite Hotrod 50 USB Taillight

The Hotrod 50 is a thin strip of bright red LEDs that mounts to a seatpost or seat stay with a rubber strap and charges by USB. Fifty lumens is plenty for a taillight, and the wide strip is visible from the side as well as behind. Several modes include a daytime flash that gets attention even in Texas sun. Runtime in flash mode is long. The strap fits round posts; for e-bikes with a rack that blocks the seatpost, mount it to a seat stay or buy a rack-mount light instead. It is a cheap, reliable improvement over most stock taillights.

Best for: Every commuter · Daytime visibility · Bikes with a free seatpost or stay

Bike with a rear cargo bag
Tire Repair Kits

Dynaplug Racer Pro Tubeless Repair Tool

For e-bikes running tubeless — more common on eMTBs and premium commuters — a plug tool is the only practical roadside repair. The Dynaplug Racer Pro is a machined aluminum tool with pre-loaded brass-tipped rubber plugs: find the hole, push the plug in, pull the tool out, add air. It works without removing the wheel or tire, which matters on a heavy e-bike with a hub motor. It is more expensive than bacon-strip kits but far less fiddly. If your tires have tubes, skip this and buy patches; if they are tubeless, this belongs in your kit.

Best for: Tubeless e-bikes and eMTBs · Riders who want a fast, no-lever fix · Heavy bikes where wheel removal is a chore

City bike with a backpack
E-Bike Locks

Foldylock Compact Folding Lock

The Foldylock Compact is a lighter, less expensive folding lock that still earned a Sold Secure rating and comes with a tidy frame case. It is a good match for riders who stop at shops and cafes several times a day and want something they will actually reach for instead of rolling the dice on a cable. The links open wide enough for most e-bike frames plus a wheel and a rack, and the keyed cylinder is better than the bargain folding locks flooding the market. It is not in the same class as the ABUS 6500 for serious theft pressure, so treat it as a mid-risk lock.

Best for: Quick stops and errands · Suburban and campus parking · Riders who want light weight over maximum security

Green and black helmet on a bike handlebar
Gloves

Giro DND Full-Finger Gloves

The DND is a plain full-finger glove with a thin synthetic palm, a breathable back and touchscreen-compatible fingertips. It has been in Giro's line for years because it does the simple job well: grip on the bars, protection for palms in a fall, and sweat wicking in heat. There is no padding, which some riders prefer for bar feel and others miss on long rides. For an e-bike commuter in Texas it is a three-season glove; in summer it is on the warm side but the backs breathe. Sizing is typical Giro — order your usual.

Best for: Commuters who want palm protection · Trail riders · Touchscreen use without removing gloves

Black ventilated bike helmet
E-Bike Helmets

Giro Register MIPS Helmet

The Register is the helmet we point people to when they want real rotational protection and do not want to think about sizing. Giro ships it in a single universal adult size with a wide-range dial, adds MIPS, and keeps the price near the bottom of the MIPS market. Ventilation is generous for the money, the visor snaps off, and replacement pads are easy to find. It is a recreational lid rather than a commuter-specific design, so there is no light mount or vent shutter. For neighborhood loops, campus rides and casual weekend miles it is hard to beat on value.

Best for: Budget-conscious riders who still want MIPS · Households buying several helmets at once · Casual neighborhood and campus riding

Bicycle locks and chains on a wall
Mirrors

Hafny Bar End Mirror (HF-MR095)

Hafny's bar-end mirror is a slimmer, more modern take than the Mirrycle, with a stainless lens option, a compact round housing and an expander plug that locks into the bar. It tucks in closer to the grip, which e-bike owners who park in tight garages appreciate. The image is good, the mount is secure, and the price is friendly. Because the mirror body is small, the field of view is narrower than larger mirrors, so you will be turning your head a bit more. Like all bar-end mirrors, it needs the bar end open and will be the first thing to hit the ground in a tip-over.

Best for: Riders who want a low-profile mirror · Folding e-bikes (check fold clearance) · Commuters in tight storage spaces

Bicycle with a rear basket
Child Seats

Hamax Caress Child Bike Seat

Hamax's Caress is a rear child seat with a reclining back, which sounds minor until a toddler falls asleep on the ride home. It is sold in frame-mount and rack-mount versions, has adjustable foot straps and a three-point harness, and offers a bit of suspension through the mount on the frame version. It is slightly heavier and bulkier than the Yepp Nexxt but typically less expensive. On e-bikes, frame-mounted seats need a round, unobstructed seat tube; many step-through and battery-in-frame designs block that, which pushes you to the rack-mount version and a rated rack.

Best for: Parents of nappers · Longer neighborhood and trail rides · Riders who want a value alternative to Thule

Bike with a rear cargo bag
Phone Mounts

Lamicall Bike Phone Holder (clamp style)

Lamicall's clamp-style holder represents the large category of universal mounts that grip the phone with spring-loaded arms and need no special case. It is the easy, cheap answer for riders who do not want to commit to an ecosystem, and for loaner bikes, kids' bikes or a second e-bike. The phone can rotate to landscape and the clamp fits most bars. The honest downside of every clamp mount is the same: vibration from fat tires and rough pavement can loosen the grip over time, and the arms cover part of the screen edges. Tighten it, check it, and do not use it on technical trails.

Best for: Budget shoppers · Riders who change phones or cases often · Casual neighborhood rides

City bike with a backpack
Mirrors

Mirrycle MTB Bar End Mirror

The Mirrycle has been the default flat-bar mirror for decades because it simply works: a glass convex lens on a ball-joint arm that plugs into the bar end and stays where you aim it. On an e-bike doing 20 mph with traffic behind you, a mirror you trust is worth more than most gadgets. The convex shape gives a wide view at the cost of making cars look farther away, which you get used to quickly. Installation requires removing or trimming the bar plug and grip end. It is a bit bulky, and the arm sticks out enough to catch on door frames.

Best for: Commuters riding with traffic · Flat-bar e-bikes and cruisers · Riders who found stick-on mirrors useless

Black ventilated bike helmet
Lighting (Accessory)

NiteRider Lumina 1200 Boost Headlight

The Lumina 1200 Boost is for riders who go faster or ride darker places than a suburban bike path: it throws 1200 lumens in boost mode, has a lock mode so it will not turn on in a bag, and a sturdy bar strap mount. It is a popular light for eMTB and fat-tire riders who hit unlit trails, and for Class 3 commuters covering ground quickly. Runtime at full power is short, so you use boost as needed and cruise on medium. It is heavier and more expensive than the Cygolite Metro Plus. NiteRider has a long track record of durable housings.

Best for: Trail and unlit path riders · Faster Class 3 commutes · Riders who want boost on demand

Green and black helmet on a bike handlebar
Gloves

Pearl Izumi Elite Gel Gloves

Hand numbness is a common complaint on e-bikes because upright riders put steady pressure on the same spot of the palm. The Elite Gel is a half-finger summer glove with gel pads placed over the ulnar nerve area, a wicking back, and a pull-tab to get them off. It is cooler than a full-finger glove and the padding takes the sting out of chip-seal roads and trail vibration. The gel is moderate rather than thick, which most riders prefer. It runs true to size. It will not protect fingertips in a crash the way a full-finger glove does.

Best for: Riders with hand numbness · Hot-weather commuting · Cruiser and upright bikes

Bike with a rear cargo bag
Bike Covers

Pro Bike Tool Outdoor Bike Cover

If your e-bike lives on a patio or under a carport, a cover buys time against Texas sun, dust and afternoon storms. The Pro Bike Tool cover uses a heavier ripstop fabric than the bargain covers, has a buckle strap under the bike to stop wind from lifting it, and includes lock holes so you can U-lock through the cover. Sizing matters: fat-tire and cargo e-bikes with racks and baskets need the larger size. No cover makes outdoor storage equal to a garage, and heat still builds under a dark cover, so bring the battery inside regardless.

Best for: Patio and carport storage · UV and dust protection · Riders without garage space

City bike with a backpack
Phone Mounts

Quad Lock Handlebar / Stem Mount

The original Quad Lock bike mount is a compact zip-tied or O-ring mount that sits on the stem or bar and takes up almost no space. It is the cheaper way into the Quad Lock system and a better fit for e-bikes with short stems or folding bikes with unusual cockpits. The same twist lock keeps the phone secure; you give up the forward, level position of the Out Front mount, so the phone sits a little closer and tilts with the stem. Folding-bike owners like that it does not stick out. As with all Quad Lock products, you need a compatible case.

Best for: Folding e-bikes with tight cockpits · Riders who want the smallest mount possible · Stem-mounted viewing

Green and black helmet on a bike handlebar
Bags

ROCKBROS Top Tube Bag with Phone Window

A top tube bag is the cheapest way to carry keys, a wallet and a phone without a backpack, and ROCKBROS makes the most common version: a strap-on pouch with a touch-screen window on top and a small cable port. On e-bikes with a battery in the downtube, the top tube is often the only free frame real estate. Waterproofing is 'resistant', the window dims touch sensitivity, and a larger phone may not fit, so check the listed dimensions. It is a cheap, useful bag, not a premium one. For a charger you will still want a trunk bag or pannier.

Best for: Riders who want a no-backpack commute · Keys, wallet and snack storage · Step-through and folding e-bikes with limited frame space

Electric bike handlebar and display detail
Phone Mounts

Rokform Pro Series Bike Phone Mount

Rokform's system combines a twist lock with a strong magnet, aimed at riders who beat on their gear. The Pro Series mount is machined aluminum and clamps to the bar or stem faceplate, and the phone attaches via a Rokform case or a universal adapter. It is a favorite with mountain bikers and eMTB riders for the redundancy of magnet plus lock. Cases run bulkier than Peak Design or Quad Lock, and the ecosystem is smaller, but the mount itself is overbuilt in a good way. Fat-tire and off-road e-bike riders who want something that will not shake loose should shortlist it.

Best for: eMTB and fat-tire riders · Riders who want magnet and lock redundancy · Rough roads and trails

Browse

Accessories by category

Grouped the way a shop is organized. Each category page has buying notes, compatibility tips and its own filters.

Safety3 categories
Security3 categories
Cockpit3 categories
Carry5 categories
Storage1 categories
Repair3 categories
Comfort1 categories
Apparel2 categories

Buyer guides

Common problems