Frisco E-Bike
Bike tools organized on a workshop rack

Representative photo. Product photos and current options are on the Amazon listing.

Mid-Drive Components · Lekkie

Lekkie Bling Ring 42T Chainring for Bafang BBS02/BBSHD

The stock Bafang chainring sits far outboard, which gives many BBS02 and BBSHD builds a poor chainline and extra chain wear. Lekkie's Bling Ring is the popular fix: a machined aluminum narrow-wide chainring that moves the teeth inboard to improve chainline and holds the chain better off-road. It comes in several tooth counts; 42T is a common all-round choice that lowers gearing a bit from the stock 46T for better climbing. Make sure you buy the version for your motor — BBS02 and BBSHD use different spiders.

BBS02B and BBSHD riders chasing a straighter chainlineHilly terrain where a smaller ring helpsAnyone replacing a worn stock steel ring

Current price and availability are shown on Amazon.

See Current Amazon Listing

Affiliate Disclosure: We may earn a commission when you purchase through links on this page, at no additional cost to you. Details

We link to Amazon search results for this model so you always see the current listing and variants. Amazon is the seller; we are not.

Key considerations

  • BBS02 and BBSHD versions are different — order the one that matches your motor
  • Narrow-wide teeth need a chain in good condition to shift cleanly
  • Smaller tooth counts reduce top speed slightly
  • Check chainstay clearance on fat bikes and small frames

Pros

  • Better chainline, less chain drop
  • Durable machined aluminum
  • Several tooth counts

Considerations

  • Premium price
  • Motor-specific versions
  • Minor gearing change

Features & specifications

Tooth count42T

Specifications are manufacturer-published figures or our own notes; confirm on the current listing before purchase.

Compatibility notes

  • Bafang BBS02/BBS02B (BBS02 version) or BBSHD (BBSHD version) only — not for hub-motor bikes

Keep it running

Replacement parts

Confirm fitment on your bike before ordering — see each part’s compatibility notes.

Compare

Similar alternatives

All mid-drive components →
Tools hanging on a repair shop wall
E-Bike MotorsFeatured

Bafang BBS02B 48V 750W Mid-Drive Conversion Kit

The BBS02B is the mid-drive kit that turned thousands of ordinary bikes into e-bikes. It replaces the bottom bracket with a motor unit that drives the chainring, so it uses your gears and climbs far better than a hub motor of the same wattage. Kits bundle the motor, a chainring, cranks, display, throttle, brake sensors or cutoff levers, and a speed sensor; the battery is sold separately. Installation is a weekend job with a few special tools. It is not quiet under hard load and it is hard on chains, but it is the most proven budget mid-drive there is.

Best for: Converting a rigid or hardtail bike with a standard 68–73 mm threaded bottom bracket · Hilly commutes where a hub motor struggles · Riders who want gear-assisted climbing rather than raw throttle power

View details & where to buy

Sold on Amazon

Bike tools organized on a workshop rack
E-Bike Motors

Bafang BBSHD 48V/52V 1000W Mid-Drive Conversion Kit

The BBSHD is the BBS02's bigger sibling: a 1000W nominal mid-drive with a beefier case, a 30A controller, and a reputation for taking abuse that the BBS02 would not survive. It is the pick for heavy riders, cargo hauls, steep terrain, and fat-bike conversions, and it is happy on 52V packs. The trade-offs are weight, a wider Q-factor at the pedals, and more chain wear than any hub motor. Like the BBS02, it ships as a kit without a battery and needs a threaded bottom bracket shell in the matching width.

Best for: Heavy riders and cargo conversions · Fat bikes (100/120 mm shell versions) and steep hills · Riders who want more headroom than a BBS02B

View details & where to buy

Sold on Amazon

Mountain bike drivetrain components
E-Bike Chains

KMC e8 E-Bike Chain (8-Speed)

KMC's e-series chains are built for the extra torque a mid-drive motor puts through the drivetrain, with thicker, stronger plates and pins than a standard chain of the same speed. The e8 is the 8-speed version and also works on most 7-speed systems with 7-speed cog spacing. If you have a Bafang BBS02, BBSHD or a production mid-drive bike (Bosch, Shimano STEPS, Bafang M-series) with an 8-speed cassette, this is the chain to buy when the old one measures worn. It will not make a hub-motor bike faster, but it will not hurt either.

Best for: Mid-drive e-bikes with 8-speed cassettes · BBS02/BBSHD conversions · Heavy riders who break standard chains

View details & where to buy

Sold on Amazon

Affiliate Disclosure: We may earn a commission when you purchase through links on this page, at no additional cost to you. Details