Representative photo. Product photos and current options are on the Amazon listing.

DNP Epoch 7-Speed Freewheel 11-28T

Name: DNP Epoch 7-Speed Freewheel 11-28T
Brand: DNP

The DNP Epoch is the upgrade freewheel for hub-motor e-bikes: an 11-tooth small cog instead of the usual 14, which gives you a usefully taller top gear so you can still pedal along at 20–28 mph rather than spinning out. It is a thread-on 7-speed unit with a nickel finish and is a direct swap for the Shimano TZ-series on most bikes. Shifting is a touch less refined than Shimano and the pawls can be noisy, but for riders who pedal along with the motor, the 11T is the main reason to buy it.

Class 2/3 e-bike riders who spin out in top gear7-speed thread-on hub-motor bikesUpgrading a worn stock freewheel

Current price and availability are shown on Amazon.

See Current Amazon Listing

Affiliate Disclosure: We may earn a commission when you purchase through links on this page, at no additional cost to you. Details

We link to Amazon search results for this model so you always see the current listing and variants. Amazon is the seller; we are not.

Key considerations

Thread-on only; not for cassette hubs
Derailleur must be able to sit close enough for an 11T cog — most Tourney units do
Usually needs a slightly shorter chain than a 14-28
DNP also sells 8- and 9-speed versions; match your shifter

Pros

Taller top gear
Direct thread-on swap
Good value

Considerations

Louder freewheeling
Slightly rougher shifting
Chain length may need adjusting

Features & specifications

Speeds	7
Range	11-28T

Specifications are manufacturer-published figures or our own notes; confirm on the current listing before purchase.

Compatibility notes

Thread-on freewheel hubs (most hub-motor e-bikes) with 7-speed shifters — confirm thread-on, not cassette

Compare

Similar alternatives

All freewheels →

FreewheelsFeatured

Shimano MF-TZ500 7-Speed Freewheel 14-28T

Most rear hub-motor e-bikes use a thread-on freewheel rather than a cassette, and the 7-speed Shimano MF-TZ500 (successor to the TZ-31) is the one that comes on a huge share of them. It screws onto the motor's threaded boss and comes off with a standard Shimano freewheel remover. The 14-28 range is conservative: fine for flat commuting and assisted riding, limiting if you want to pedal fast downhill. When the freewheel starts skipping or the pawls stick, replacing it is a cheap twenty-minute job if you have the tool.

Best for: 7-speed hub-motor e-bikes with a thread-on freewheel · Fixing a skipping or sticky freewheel · Like-for-like replacements

View details & where to buy

Sold on Amazon

E-Bike Chains

KMC Z7 Chain (6/7/8-Speed)

The KMC Z7 (formerly labeled Z51) is the standard replacement chain for 6-, 7- and 8-speed drivetrains, which covers most hub-motor e-bikes. It is an inexpensive chain that includes a reusable quick link, so installation needs only a chain breaker to size it. On an e-bike the chain carries only your pedaling load with a hub motor, so a basic chain like this lasts well; with a mid-drive you should step up to an e-bike-rated chain. Measure your old chain for length and replace the freewheel if the old chain was badly worn.

Best for: 7-speed hub-motor e-bikes · Budget drivetrain refreshes · Riders who want a quick-link install

View details & where to buy

Sold on Amazon

Affiliate Disclosure: We may earn a commission when you purchase through links on this page, at no additional cost to you. Details